Updating the flip usb driver avr
I attempted the 1.0.5 firmware update instructions for Windows on Fi Shield Firmware Upgrading and modified the command prompt so it will work and pass all checks.wifi_update attempt: I modified the path and put the path in quotes to get the command line to work.
After passing all checks, the shield's green Link LED is lit for a second, and then the blue Data LED is lit and the blue LED does not seem to turn off. I assumed this means the data was being written from the Atmel to the HDG104.
This is supposed to be the same file in the IDE 1.0.5. Can you verify the firmware updated to the wifi shield by adding Serial.println(Wi Fi.firmware Version()) to your program on the UNO and making sure it comes back as 1.1.0?
If you are having trouble upgrading the firmware on the wifi shield to 1.0.5, please contact me and I will send you the file and answer other questions you have with upgrading. I tested that my 1.0.5 IDE works with the UNO R3.i'm sure the version is 1.1.0 and seems to be working with some of the examples in the arduino IDE but not with all of them, i'll keep trying some of the examples and post the ones in wich is not working.
dfu-programmer is a multi-platform command-line programmer for Atmel (8051, AVR, XMEGA & AVR32) chips with a USB bootloader supporting ISP.
Most Atmel devices having a USB port come pre-programmed with the bootloader, and this is a lightweight alternative to Atmel's own FLIP/Batch ISP program.
Now, these people use Win10/64 and I wish to give them proper advice.
Do you know if the Flip installer at Microchip works on Win10/64? Alternatively, should I use Hlavac's drivers from 2010: https://community.atmel.com/proj...
I also dont understand what the instructions mean in step 4. Is it easier to upgrade the wifi shield on windows 7? Arduino support sent me a wifi file for 1.0.5 and it worked perfectly for me. anyone know how to make the official wifi shield work with and arduino UNO R3 ?? If you read the comments in the forum, nobody seems to report success with the product. I then tried upgrading the shield firmware (have 1.0.5 IDE), and after some effort got what almost looked ok except the bootloader overlap warning (see below). Regards, Ric C:\Program Files\Atmel\Flip 3.4.7\-device AT32UC3A1256 -hardware usb -operation erase f memory flash blankcheck loadbuffer wifi_program verify start reset 0Running batchisp 1.2.5 on Wed Feb 12 2014AT32UC3A1256 - USB - USB/DFUDevice selection....................... I know failing projects get reported more frequently because people want help. I have tried on Mac using these instructions: But, I cannot get past step 3 or 4. PASS 0x00000 0x3ffff Parsing ELF file....................... Can't open input file "c:\temp\wifi_dnld.elf"FAIL Reading error.(A)bort, (R)etry, (I)gnore ? PASS 0x00000 0x3ffff Parsing ELF file....................... Can't open input file "/Arduino/hardware/arduino/firmwares/wifishield/binary/wifi_dnld.elf"FAIL Reading error.(A)bort, (R)etry, (I)gnore ? After this firmware upgrade though, the example can't find the shield, and the shield has a solid blu LED on (data). Update: I tried using the wifi file, and now I'm back to connecting to a network. The Atmel on my Arduino wifi shield is a 32UC3A1512-U. I've tried using the 15 in the command prompt with the same results.
The USB connection in device manager is removed after the first step and I cannot reconnect to accomplish the second step until I cycle power to the shield.Hi guys, I have 1500 AVR32 devices in the field, with customers wishing to upgrade their devices.